TeeJet® Tip Strainers
TeeJet® Line Strainers
TeeJet® Self-Cleaning Line Strainersiners
Posts Tagged ‘strainers’
Strainers
October 26th, 2009TeeJet® Line Strainers
October 26th, 2009TeeJet® Tip Strainers
October 26th, 2009TeeJet® Self-Cleaning Line Strainers
September 3rd, 2009
The TeeJet self-cleaning strainer extends your spraying time wtih a self-cleaning feature that minimizes clogging. Mounted on the discharge side of the pump, the strainer uses excess pump flow to bypass clogging particles back to the spray tank.
The tapered inner cylinder inside the entire length of the screen provides a gap between the screen face and the cylinder. This gap causes the inlet fluid to flow at a high velocity past the screen face providing for a continuous wash down of particles to the bypass line. In order for the wash down to occur, a minimum flow rate of 6 gpm (23 l/min) for 3/4″ and 1″ sizes and 8 gpm (30 l/min) for 1-1/4″ and 1-1/2″ sizes is required through the bypass line.
Features
- Available with or without mounting lugs.
- AA126 strainers are made of glass filled polypropylene and are available in 3/4″, 1″, 1-1/4″, and 1-1/2″ (F) NPT or BSPT threads as well as 50 and 75 series flange connections.
- AA124 strainers are made of an aluminum head with a nylon bowl and are available in 3/4″, 1″, 1-1/4″, and 1-1/2″ (F) NPT or BSPT threads.
- Both use an all stainless steel strainer element.
- Strainers with mounting lugs are designated by “ML”.
AA126 Series
September 3rd, 2009
Flush-out Line Strainers – 3/4″ and 1″ NPT or BSPT (F) Threads
Features
- Maximum pressure rating of 200 psi (14 bar).
- Strainer head and bowl are made of glass filled polypropylene with EPDM gasket.
- Screens are made of 304SS with color coded polypropylene frames and are removable for cleaning.
- Removable cap and O-ring for flush-out or self-cleaning operations.
- Integral mounting provision allows the strainer to be attached to machine using M8 or 5/16″ diameter bolts.
- Available with 3/4″ or 1″ NPT or BSPT (F) threads and 50 series flange fitting connections for easy assembly.
- Uses same screen as the AA124A line strainer.
AA124 Series
September 3rd, 2009
Features
- Strainer heads are available in polypropylene, nylon, aluminum, and cast iron.
- Bowl materials include polypropylene or nylon.
- Each strainer includes stainless steel screen (with polypropylene frames on 3/4″ to 1-1/2″ pipe sizes).
- Maximum temperatures up to 38°C/100°F.
- Viton® O-ring seal supplied with 3/4″ and 1″ nylon models; EPDM supplied with 3/4″ and 1″ polypropylene models; Buna-N gaskets supplied with 1-1/4″ and 1-1/2: sizes. Viton optional.
- (B) = BSPT
AA122 Series
September 3rd, 2009
The AA122 line strainer features a compact size that is well suited for small agricultural and turf sprayers.
Features
- Constructed of polypropylene head and bowl with stainless steel screen.
- Excellent chemical resistance.
- Available with 1/2″ or 3/4″ (F) NPT pipe connections.
- Maximum pressure rating of 150 psi (10 bar).
- On the 37270-122-PP the screen may be periodically flushed by opening a valve (valve not included) in flush-out line.
TeeJet® Strainer and Check Valves
September 3rd, 2009
4193A TeeJet Strainer and Check Valve
Minimizes nozzle dripping; fits all TeeJet nozzles.
- Ball check opens at 5 psi (0.34 bar).
- Recommended for flow rates up to 0.8 gpm (3 l/min).
- 24, 50, 100, and 200 mesh screens.
- Not for use with AI or DG tips.
Note:Use of these ball check valves results in a pressure drop of 5 psi (0.34 bar) to 10 psi (0.7 bar) depending on spring rating.
11750 TeeJet Check Valve
For larger capacity TeeJet nozzles where strainers are not required.
- Ball check opens at 5 psi (0.34 bar); 10 psi (90.7 bar) spring also available.
- Recommended for flow rates from .40 to 1.5 gpm (1.5-5.7 l/min).
- Made in choice of stainless steel, brass, aluminum, or polypropylene with stainless steel ball and spring.
TeeJet® Slotted Strainers
September 3rd, 2009One-piece strainers for use with liquids containing suspended solids.
55215 Self-Retaining Tip Strainer
September 3rd, 2009
Features
- For use with Quick TeeJet caps.
- Allows tip strainer to be easily removed from nozzle body for cleaning.
- 50 or 100 mesh color coded strainer with optional EPDM or Viton® gasket.
