• For pressures up to 1,000 psi (70 bar).
• Fits models 23H and 31 GunJet spray guns.

(B)4727 Sure Grip Handle

• Constructed of brass.
• Rubber covered.
• 1/4″ NPS (M) or BSPT hose inlet connection.

4754 Sure Grip Handle

• Constructed of brass.
• Rubber covered.
• 3/4″ garden hose thread (F) inlet connection.

4725 Handle

• Constructed of 1/8″ brass pipe with bushing.
• Slip hose over pipe to form handle.

4688 Trigger Valve

• With trigger lock.
• Maximum flow rate of 2 gpm (7.6 l/min).
• Maximum operating pressure of 250 psi (17 bar).
• 1/4″ NPT (F) inlet connection and a 11/16″–16 (M) outlet connection.
• Use with TeeJet and ConeJet tips, adjustable ConeJets or MulteeJet tips.
• Constructed of brass.

6466 Trigger Valve

• Same as 4688 less trigger lock and with extra long trigger.
• Constructed of brass.

6104 Trigger Valve

• With trigger lock.
• Same as 4688 expect with 1/4″ NPT (F) inlet and outlet connections.
• Constructed of brass

6590 Trigger Valve

• Same as 6104 less trigger lock and with extra long trigger.
• Constructed of brass.

AA31 for pressures up to 500 psi (35 bar)

• Comfortable palm fitting gun.
• For use with any TeeJet spray tip.
• 1/4″ NPS (M) inlet connection.
• Forged brass body and nickel-plated steel trigger.
• Teflon® valve seat and packing, stainless steel stem.
• Weighs 12 ounces (0.34 kg).
• Also supplied as 31-1/4F with 1/4″ NPT (F) inlet connection.

13212 Adapter

• 3/8″ NPT (F) outlet.
• 3/4″ garden hose thread inlet for use with 3/8″ 36 valve.

• Interchangeable nozzle tips are color coded for easy identification of nozzle tip size.
• Nozzle tips provide a 45° full cone “showerhead” spray pattern.
• Convenient trigger lock for continuous spraying.
• Options available: hose shank swivel for inlet connection and extension wand and adapters for low-volume and spot spraying.
• Maximum operating pressure of 200 psi (14 bar).
• Made of nylon with Viton® O-rings and stainless steel springs.

Minimizes nozzle dripping; fits all TeeJet nozzles.

• Ball check opens at 5 psi (0.34 bar).
• Recommended for flow rates up to 0.8 gpm (3 l/min).
• 24, 50, 100, and 200 mesh screens.
• Not for use with AI or DG tips.

Note:Use of these ball check valves results in a pressure drop of 5 psi (0.34 bar) to 10 psi (0.7 bar) depending on spring rating.

11750 TeeJet Check Valve

For larger capacity TeeJet nozzles where strainers are not required.

• Ball check opens at 5 psi (0.34 bar); 10 psi (90.7 bar) spring also available.
• Recommended for flow rates from .40 to 1.5 gpm (1.5-5.7 l/min).
• Made in choice of stainless steel, brass, aluminum, or polypropylene with stainless steel ball and spring.

For spraying pesticides at higher pressures and flow rates. Especially suitable for wettable powders and other abrasive chemicals. Larger capacity nozzles are also used in air blast sprayers.

Features

• Produce smaller droplets for thorough coverage with contact pesticides and foliar applications.
• Maximum spray pressure to 300 psi (20 bar).
• Hollow cone spray pattern produced by cores #13, 23, 25, 45, and 46.
• Full cone spray pattern produced by cores #31, 33, 35, and 56.

Orifice Discs
Available in a variety of sizes and materials. Ceramic for increased wear life, hardened stainless steel, stainless steel, and polymer.

Ceramic sizes available:
DCER-2 through DCER-8, DCER-10.

Cores
Standard cores are made of brass. Also available in ceramic, hardened stainless steel, aluminum, and nylon. All cores, with the exception of ceramic, are made with rear “nibs”. Be sure core is always placed with the nib facing the nozzle body.

Ceramic sizes available:
DC13-CER, DC23-CER, DC25-CER,
DC31-CER, DC33-CER, DC35-CER,
DC45-CER, DC46-CER, DC56-CER.

Strainer Note: For nozzles using orifice disc numbers 1, 1.5, and 2; or core numbers 31 and 33, slotted strainer number 4514-20 equivalent to 25 mesh screen size is required. For all other larger capacity discs and cores, slotted strainer number 4514-32 equivalent to 16 mesh screen size is required.

Features

• TeeJet Off-Center spray tips are commonly installed in double and single swivel nozzle bodies.
• Because these bodies are adjustable for angular positions, wide spray swaths are easily obtained.
• Recommended spraying pressures are 30–60 psi (2 -4 bar).
• Available in stainless steel or brass material.

Features

• Tapered edge flat spray pattern for uniform coverage in broadcast spraying.
• VisiFlo color-coded version available in stainless steel, ceramic, and polymer in 80° or 110° spray angles in selected sizes.
• Available in ceramic 80° capacities 01-02 and 110° capacities 01– 02. For larger capacities see XR and XRC TeeJet tips.
• Standard version (not color-coded) available in 15°, 25°, 40°, 50°, 65° spray angles in brass, stainless steel, or hardened stainless steel.
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket.
• Automatic spray alignment for sizes 10 through 20 with 25610-*-NYR Quick TeeJet cap and gasket.